AMP 400-1000L I&O Manual 37
IX(continued)
B. Factory Supplied Relief Valve Package
installed to the outlet as shown in Figure 15
Item no. Description
1 2" X 2" X 1/2" reducing tee
2 Flow Switch
3 T & P Gauge
4 2" pipe nipple, close
5 2" X 2" X 1" reducing tee
6 3/4" pipe nipple, close
7 1" x 3/4" Hex Bushing
8 Pressure relief Valve
1
2
4
3
1
4
5
7
8
6
Factory Installed
Field Installed
Brass Bushing is installed by factory.
Flow switch sensor and o-ring are
shipped in a bag inside the jacket.
Water Outlet
Connection
Flow
To Next Page
Loading...
