Need help?Do you have a question about the Thermo King CSR40-145 Power Saver and is the answer not in the manual?
General| Brand | Thermo King |
|---|---|
| Model | CSR40-145 Power Saver |
| Category | Refrigerator |
| Language | English |
General safety guidelines for handling and operating refrigeration units, including personal protection and equipment handling.
Precautions for handling refrigerants, emphasizing environmental protection and safe operational procedures.
Guidelines and precautions for working with high voltage electrical systems in refrigeration units.
Cooling capacity data for various models and operating conditions.
Heating capacity data for various models, including electric resistance.
Detailed specifications for motors, heater rods, and control circuits.
Specifications for refrigerant charge, oil, and pressure cutouts.
Technical details and settings for the MP-3000 controller, including defrost and operational modes.
Description of the MP-3000 controller's features, display, keypad, and data logging capabilities.
Description of unit controls including ON/OFF switch and MP-3000 controller features.
Overview of the MP-3000 controller's capabilities, display, keypad, and basic functions.
Description of the controller's display menus, including Setpoint, Data, Alarms, and Commands.
Troubleshooting guide for mechanical issues like compressor not operating or excessive amperage.
List of error messages displayed by the controller and corresponding corrective actions.
Detailed list of alarm codes, their descriptions, and necessary corrective actions.
Troubleshooting guide for refrigeration system issues like high load temperature or low head pressure.
Information on required service tools, fittings, and leak detection methods.
Procedures for using vacuum pumps and evacuating the refrigeration system.
Procedures for refrigerant recovery, leak testing, and charging the system.
Guides for replacing components like stepper motor valves, compressors, and coils.
Configuration of AFAM system settings for air exchange rate, delay, and rate.
Configuration of AFAM+ system settings for O2 and CO2 levels.
To Next Page