To Next PageTo Next Page
Need help?Do you have a question about the Thermo King SLX-100 and is the answer not in the manual?
General| Brand | Thermo King |
|---|---|
| Model | SLX-100 |
| Category | Refrigerator |
| Language | English |
This manual is published for informational purposes only and should not be considered all-inclusive.
Thermo Assistance is a multi-lingual communication tool for direct contact with an authorized Thermo King dealer.
Provides guidance on handling refrigerant exposure to eyes, skin, and during inhalation.
Details first aid for refrigerant oil exposure to eyes, skin, inhalation, and ingestion.
Outlines general safety practices and warnings for operating and servicing the unit.
Warns about electrical hazards with electric operation and provides precautions for welding.
Describes the Thermo King SLX models as self-contained, diesel-powered units mounted on trailers.
Explains Continuous Run Operation and optional CYCLE-SENTRY operation modes for the unit.
Introduces the SR-2 controller used for cooling, heating, and defrost functions on SLX units.
Details the displays for SLX Single-Temperature and SLX Spectrum SR-2 controllers.
Describes the function of various control keys on the SR-2 controller, including dedicated and soft keys.
Provides step-by-step instructions for switching the unit on, including the master isolator switch.
Explains the location and function of the ON/OFF Master Isolator Switch for powering the microprocessor.
Details the procedure for changing the temperature setpoint using the controller's soft keys.
Instructions on how to view miscellaneous gauge readings for both Single Temperature and SLX Spectrum models.
Guide on accessing and viewing temperature sensor readings displayed by the controller.
Step-by-step instructions for locking and unlocking the controller keypad to prevent unauthorized changes.
Explains how to navigate through the nine individual menu areas of the operator menu.
Procedure to change the display language of the controller through the operator menu.
How to access, view, and clear alarms displayed by the unit's controller.
Instructions for accessing datalogger displays and initiating a 'START OF TRIP' marker.
Detailed steps for initiating and performing a Pretrip test on the unit.
Guide on accessing and viewing the unit's hourmeter displays.
Instructions for switching between CYCLE-SENTRY and Continuous Run operating modes.
Procedure for selecting between electric standby and diesel operating modes.
Procedure to adjust the intensity of the controller display screen.
How to view the current time and date displayed on the controller.
Comprehensive checklist for essential pre-trip inspections to ensure proper unit operation.
Guidelines for inspecting the trailer, load, and performing enroute inspections during operation.
Details recommended inspection and service intervals based on unit operating hours and age.
Instructions for documenting all inspections and service performed on the Service Record Sheet.
Details the required inspection for activating the second year of warranty coverage.
Outlines the terms and conditions of the 24-month limited warranty for Thermo King SLX units.
Provides detailed technical specifications for the Thermo King TK 486V engine.
Lists electrical specifications including voltage, battery, fusible link, and alternator.
Details the recommended tension and frequency limits for clutch and fan polygroove belts.
Technical specifications for the Model 50 electric motor option.
Details power supply circuit breaker and cord size requirements for standby operation.
Identifies the location and purpose of various safety warning decals on the unit.
Information regarding serial number decals, unit description plates, and ID decals.
Statement confirming the product's conformity with relevant EU Machinery and EMC Directives.
Lists the specific EU directives, including Machinery, EMC, and Low Voltage, that the product complies with.
Declaration of conformity with EC Directive 2000/14/EC concerning noise emission levels.
