Thermo King T- series Manual

Unit Description
19
Figure 9: T-1200R Intermodal Spectrum SR-3
Controller Display
CYCLE-SENTRY
TM
Start-Stop
Controls
The CYCLE-SENTRY Start-Stop fuel saving system provides
optimum operating economy. When CYCLE-SENTRY Mode
is selected the unit will start and stop automatically to maintain
setpoint, keep the engine warm and the battery charged. When
Continuous Mode is selected, the unit starts automatically and
runs continuously to maintain setpoint and provide constant
airflow.
Telematics as Standard
TracKing : T-Series units come with TracKing
communication device and Bluetooth® as standard.
NOTE: Your unit may not have a standard configuration and
therefore may not include this facility. Please contact your
Thermo King Dealer for more information.
You can also download from your App store the appropriate
App to connect, and manage your unit from your mobile
device. Please contact your Thermo King Representative for
more information.
NOTE: See Tracking on page 50 for Specifications.
1. On Key (Dedicated Key)
2. Off Key (Dedicated Key)
3. Display
4. Defrost Key (Dedicated Key)
5. CYCLE-SENTRY/Continuous Mode Key
(Dedicated Key)
6. Soft Keys
OFF
ON
MENU
4
°C
4
SET SENSORSGAUGES
POINT
.8
BEN445
1
2
3
4
5
6

Thermo King T- series Specifications

General

Refrigerant	R-404A
Voltage	12V/24V DC
Defrost	Electric or Hot Gas
Model	T-series
Cooling Capacity	Varies by model
Power Source	Diesel Engine or Electric
Temperature Range	-29°C to 24°C
Control System	Microprocessor-based
Fuel Tank Capacity	Varies by model
Dimensions	Varies by model
Weight	Varies by model