Unit Description
18
Premium
NOTE: (Not available on T500R)
The Premium Truck HMI (Human/Machine Interface) Control
Panel is available as an option on TSR-3 applications. It is used
to operate the unit, display unit information and access all
TSR-3 Maintenance and Guarded Access Menus. The Control
Panel is typically located in the vehicle driver's compartment
and communicates with the base controller using a connection
on the interface board.
Figure 7: Premium HMI Control Panel
Figure 8: Premium HMI Control Panel - Spectrum
T-Series Intermodal
Your T-1200R Intermodal unit uses the (Trailer) SR-3 control
system to operate cooling, heating, and defrost functions. See
below some basic information on operating the unit.
NOTE: Note: Please contact your Dealer in order to refer to
our appropriate “Drivers Guide to Simple Operation” for
more details on operating the standard unit. See below
picture of this unit, but from here on through this manual the
standard TSR-3 Premium display will be referenced as it has
the same or similar functionality.
To Next Page
Loading...
Need help?
General
