Unit Description
21
The Electric Standby option allows the unit to be operated on
either the diesel engine or external electric power. During
Electric Standby operation, power to the unit is supplied by an
electric motor connected to a high voltage power source.
Check the unit for proper power source ratings.
Electric Power Receptacle
The electric power receptacle is used to connect the unit to an
appropriate electric power source for electric standby
operation. Turn the unit OFF before connecting or
disconnecting the power cord.
Standard Model 50 Features
The following features are standard equipment on units
equipped with Electric Standby.
Automatic Diesel/Electric Selection
The unit will automatically switch to electric operation when a
power cord is connected and the standby power is switched
On.
Overload Relay
The overload relay is self-resetting.
Hot Gas Heat
Hot gas heat is utilized on all units.
Automatic Phase Correction
The control system features two motor contactors. This allows
correct motor rotation regardless of phase rotation on the
incoming power.
Optional Model 50 Features
The following features are available as an option on units
equipped with Electric Standby.
• Electric Heater Strips
• Water Heat
To Next Page
Loading...
Need help?
General
