What to do if my Thermo King V-200 MAX TC-20 is not cooling?
If your Thermo King Refrigerator isn't cooling even when the box temperature exceeds the setpoint, first check the voltage on Pin 6 C-9. If the issue persists, consider replacing the Cab Control Box.
What to do if the Unit Operation LED is off on my Thermo King Refrigerator?
If the Unit Operation LED is OFF while your Thermo King Refrigerator is cooling, first check the voltage on Pin 7 C-9. If the LED remains off, replace the Cab Control Box.
General| Brand | Thermo King |
|---|---|
| Model | V-200 MAX TC-20 |
| Category | Refrigerator |
| Language | English |
Essential safety guidelines for operating and maintaining equipment, including eye protection and avoiding hazards.
Precautions and first aid for safe handling of refrigerants, addressing frost bite and exposure.
Guidelines for avoiding oil contact with eyes/skin and basic first aid measures.
Critical safety information regarding electrical shock risks from high and low voltage.
Details on pressure switches and safety mechanisms for unit protection.
Troubleshooting common issues with M-13/M-16 control boxes.
Troubleshooting common issues with M-17 control boxes for TC units.
Troubleshooting steps for electric standby mode issues.
Step-by-step guide for charging the refrigerant system.
Methods to check refrigerant levels and identify issues.
Procedures for checking and ensuring correct compressor oil levels.
Steps for cleaning the system after use or contamination.
Procedures for testing clutch operation and identifying issues.
Identifies causes for temperature not being obtained during operation.
Possible causes and remedies when the compressor fails to start.
Causes and remedies for the unit cycling on and off frequently.
Causes and remedies for continuous unit operation.
Causes and remedies for elevated or incorrect box temperatures.
Causes and remedies for high or low head pressure.
Causes and remedies for unit noise and compressor oil loss.
Causes and remedies for frosted/sweating lines and hot liquid lines.
Causes for cool condenser coil and unit in vacuum.
Specific checks for electric standby system components.
Maps operational symptoms to potential causes for troubleshooting.
To Next Page