Thermo Scientific 370 - Page 2

Thermo Fisher ScientificThermo Fisher Scientific
Preface
Steri-Cycle CO2 Incubator i
Preface
Model Sensor* Voltage**
370 T/C 115
371 T/C 230
380 IR 115
381 IR 230
*T/C is a thermal conductivity sensor.
IR is an infra-red sensor.
**All units are 50/60 Hz.
MANUAL NUMBER 7000370
12 23784/IN-3748 11/22/06 Note that vinyl on duct sheets not removed before shipping, vinyl color chg ccs
11 23740 10/4/06 Replaced quarter-turn fasteners with thumbscrews on top duct ccs
10 23451/IN-3294 6/30/06 Added ±5 psig to incoming CO2 pressure range ccs
9 -- 10/21/04 Updated sterilization Checkpoints concerning stacked units (per D. Figel) ccs
-- 22434/IN-3211 8/25/04 Updated water quality description for humidity pan ccs
8 21730/SI-9181 6/15/04 Added alternate 250085 solenoid valve ccs
7 21980/IN-3156 11/07/03 Added min/max load and analog output boards max external cable length ccs
6 21273/IN-3147 10/13/03 Factory default for gas guard to ON from OFF ccs
5 21574/IN-3124 8/12/03 Updated temp sensor from 290137 to 290184 (glass encapsulated) ccs
4 21237/IN-3068 2/24/03 Upgraded inner door components (370-200-9) ccs
-- 20959/IN-3048 10/1/02 Added spacers to power supply mounting ccs
3 20374/IN-2994 11/12/01 Updated 200-6 drawing - Kaizen, board hardware ccs
20460 Corrected 4-20mA board temp output to 12.5 - 162.5°C
2 20276/IN-2970 9/24/01 Clarified Step 2 of Section 4.4 ccs
1 19948/IN-2947 9/10/01 Updated CO2 inlet labels, 200-9 exploded parts drawing ccs
-- -- 6/28/01 Updates per J. Leach (art & list on page 5-4 and reference to 4-3, not 4-4 in Alarm section) ccs
0 -- 3/1/01 Original manual ccs
REV ECR/ECN DATE DESCRIPTION By