13. Press the Save Results function key to save the results to the
instrument Library or to disk.
Run a Protein test:
1. Highlight Biological Tests on the Main Menu page and press Enter.
The Biological Tests sub menu will open.
2. Highlight Protein Tests and press Enter.
Choose the required test from the Protein Tests sub menu. The
relevant test page opens. The content and layout of the page will
depend on the test selected, the way the software is configured and
which accessories are fitted.
The method parameters are documented values published in the
literature. Parameters may be edited, if required.
60 Evolution 300 and Evolution 600 User Guide Thermo Fisher Scientific
To Next Page
Loading...
