Your Thermo Scientific Thermolyne Type F6000
Furnace has been designed with function, reliabil-
ity and safety in mind. It is your responsibility to
install it in conformance with local electrical
codes. For safe operation, please pay attention to
the alert signals throughout the manual.
This manual contains important operating and
safety information. You must carefully read and
understand the contents of this manual prior to
the use of this furnace.
Warnings
To avoid electrical shock, this furnace must:
1. Use a properly grounded electrical outlet
of correct voltage and current handling
capacity.
2. Be disconnected from the power supply
prior to maintenance and servicing.
3. Have the door switch operating properly.
To avoid personal injury:
1. Do not use in the presence of flammable
or combustible materials; fire or explosion
may result. This device contains compo-
nents which may ignite such material.
2. Caution: Hot Surface - Avoid Contact. To
avoid burns, do not touch the exterior or
interior surfaces of this furnace during use
or for a period of time after use.
3. Always wear safety glasses or a safety
shield and high temperature gloves when
loading or unloading the furnace. Long
sleeved, fire retardant clothing and a fire
retardant apron is also recommended.
4. Refer servicing to qualified personnel.
3
Safety Information
Warning
Warnings alert you to a
possibility of personal injury.
Caution
Cautions alert you to a
possibility of damage to the equip-
ment.
Note
Notes alert you to pertinent facts and
conditions.
Hot Surface
Hot surfaces alert you to a
possibility of personal injury if you
come in contact with a surface during
use or for a period of time after use.
Alert Signals
To Next Page
Loading...
