Table of Contents
Section Section Title — Installation Page
3.0 Installation 15
3.1 Unpack and Inspect 15
Table 3- Checklist of Components 15
3.2 Site Preparation 15
3.3 Connect the ModulyoD to the Electrical Supply 16
3.4 Connect the Vacuum Pump 16
3.5 Connect a Vacuum Pump to the ModulyoD 16
Figure 9-Connect a VLP195FD or VLP120 Pump to the ModulyoD 17
3.6 Pump Outlet Safety 17
3.7 Test After Installation 17-18
Section Section Title — Operation Page
4.0 Operation 19
4.1 Safety 19
4.2 Sequence of Operation 19
Table 4-Sequence of Operation 19
4.3 Prepare the ModulyoD 20
4.4. Fit the Sample Container and Other Accessories 20
4.5 Pre-Cool the ModulyoD 20-21
4.6 Drying 21-22
4.7 Shut Down 22
4.8 Defrost the ModulyoD 23
4.9 Operation With No Load 24
Section Section Title — Maintenance Page
5.0 Maintenance 24
5.1 Safety 24
5.2 Precautions 24
5.3 Refrigerant Leaks 25
Section Section Title — Accessories Page
6.0 Accessories/Drying Accessories 25
Section Section Title — Warranty & Appendices Page
7.0 Warranty and Liability 26
Appendix A - Using the ModulyoD as a Cold Trap 26
Appendix B - Decision Tree 27
Freeze Drying User’s Log 28
3
To Next Page
Loading...
