Why is the liquid line frosted on my Thermo Scientific MR05 Refrigerator?
If you observe a liquid line frosted or sweating on your Thermo Scientific Refrigerator, it typically indicates a restriction in the liquid line filter drier. Determine the location and remove it. Another possible cause is a liquid line shutoff valve that is partially closed, so open the valve fully.
What causes high discharge pressure in Thermo Scientific Refrigerator?
High discharge pressure in your Thermo Scientific Refrigerator can be attributed to several factors. Non-condensables may be present in the system, so remove them. The system might be overcharged with refrigerant, so correct the charge. A discharge shutoff valve may be partially closed, so fully open the valve. The condenser fans may not be running, so check the electrical circuit. Lastly, the condenser may be dirty, so clean it.
General| Lockable | Yes |
|---|---|
| Amperage | 1.5 A |
| Temperature Range | 2°C to 8°C |
| Defrost | Manual |
| Shelves | Adjustable |
| Door Style | Solid |
| Voltage | 115V |
| Certifications | UL |
| Capacity | 5.0 cubic feet |
To Next Page