Thermo Scientific 263C-AEV-TS

Questions and Answers

S
Stephanie HarrisonAug 13, 2025
Why is my Thermo Scientific Freezer not cold enough, even though the compressor is always on?
- K
  Kevin OliverAug 13, 2025
  If the temperature inside your Thermo Scientific Freezer isn't low enough and the compressor is always running, several factors could be at play. The door might not be closing properly or is being opened too frequently; try rearranging the contents to ensure nothing is blocking the door. Reduce the amount of time the door remains open. The ambient temperature could be too high, so verify it's within the product's specified range. Also, ensure proper air circulation by moving the freezer away from the wall and allowing clearance on both sides. Finally, relocate the freezer away from direct sunlight or heat sources like radiators.
A
Angela MorrowAug 16, 2025
How to fix a Thermo Scientific Freezer that won't turn on?
- B
  blacknathanAug 16, 2025
  If your Thermo Scientific Freezer isn't working, start by checking the electrical connections. Ensure the plug is securely inserted into the socket. Also, verify that the socket itself is functioning correctly and that the power supply cord isn't damaged.
M
Michael PhillipsAug 21, 2025
What to do if my Thermo Scientific Freezer is making too much noise?
- J
  James BradleyAug 21, 2025
  If your Thermo Scientific Freezer is making too much noise, first ensure it's placed on an even surface; use adjustable feet if necessary. Also, check if the freezer is touching any other objects and, if so, reposition it to create separation.
W
William HarrisAug 25, 2025
Why is water pooling at the bottom of my Thermo Scientific Freezer?
- A
  Anna ReedAug 25, 2025
  If water is collecting at the bottom of your Thermo Scientific Freezer, it could be due to the contents touching the back wall. Try repositioning the items, so they are not in contact with the back wall. Additionally, if it's a refrigerator, check the drain opening for clogs and clean it out.
M
Marcus DunnAug 28, 2025
Why is the temperature inside my Thermo Scientific 263C-AEV-TS Refrigerator not low enough?
- F
  Felicia JonesAug 28, 2025
  If the compressor is running continuously but the temperature isn't low enough, several factors could be at play. The door might not be closing tightly, or it's being opened too often; try rearranging items to ensure the door closes properly and reduce opening times. The ambient temperature might exceed the product's specifications, so verify that the refrigerator is operating within its recommended environment. Poor air circulation behind the unit could also be a factor, so move the refrigerator further from the wall. Finally, direct sunlight or nearby heat sources like radiators can impact performance; relocate the refrigerator away from these.
D
Daniel StuartAug 31, 2025
What to do if water collects at the bottom of my Thermo Scientific Refrigerator?
- A
  Amanda BarnesAug 31, 2025
  If you notice water pooling at the bottom of your refrigerator, it could be due to a couple of reasons. First, check if the contents inside are touching the back wall of the unit; if so, reposition them to create some space. Another common cause is a clogged drain opening. To resolve this, use the cleaning plug to unclog the condensate opening.
C
Christian BarrySep 4, 2025
How to fix a Thermo Scientific 263C-AEV-TS that makes too much noise?
- E
  Emily HenrySep 4, 2025
  Excessive noise from your refrigerator can often be attributed to a couple of simple issues. First, ensure that the refrigerator is placed on a level surface; use adjustable feet if necessary. Additionally, check whether the refrigerator is touching any other objects; if so, reposition it to ensure it's standing alone.
P
pattersonkyleSep 8, 2025
What to do if my Thermo Scientific Refrigerator does not work?
- S
  steeleshannonSep 8, 2025
  If your equipment isn't working, it may be due to a break in the electrical circuit. First, ensure the plug is correctly inserted into the socket. If it is, check if the socket itself is faulty. Lastly, inspect the power supply cord for any damage.