What to do if Thermo Scientific Multiskan FC reports 'Attempt to set the instrument serial number when it already has been set'?
If the instrument serial number has already been set, do not attempt to set it again.
What to do if the Thermo Scientific Multiskan FC lamp fails?
If the lamp fails, replace it. This error can also occur if either the measure head or plate motors have positioning issues.
What to do if Thermo Scientific Multiskan FC Measuring Instruments reports a plate positioning error?
If there is a plate positioning error, check that nothing is preventing the plate from moving freely. If the issue persists, contact service.
What to do if Thermo Scientific Multiskan FC reports a measure head positioning error?
If there is a measure head positioning error, ensure that nothing obstructs the free movement of the measure head. If problems continue, contact service.
What to do if my Thermo Scientific Multiskan FC says 'file already exists'?
If the file already exists, save the file with a different name.
Why does my Thermo Scientific Measuring Instruments say 'Not enough memory for a new user-defined parameter'?
The internal memory is full. Back up your data by exporting the protocols/runs. Then, free up space by deleting protocols/runs from the internal memory.
What to do if Thermo Scientific Measuring Instruments reports a file open error (file not found)?
If there is a file open error because the file was not found, contact service.
What to do if Thermo Scientific Measuring Instruments reports 'Such an error during startup, which prevents measurement'?
If there is an error during startup that prevents measurement, restart the instrument. If the error continues, contact service.
What to do if Thermo Scientific Multiskan FC Measuring Instruments reports a measure signal saturation?
If there is a measure signal saturation, contact service.
What to do if Thermo Scientific Multiskan FC Measuring Instruments reports a filter wheel positioning error?
If there is a filter wheel positioning error, check that the filter wheel is correctly in place. If the issue persists, contact service.
General| Brand | Thermo Scientific |
|---|---|
| Model | Multiskan FC |
| Category | Measuring Instruments |
| Language | English |
Describes the target audience and application areas for the Multiskan FC.
Explains the fundamental working mechanism of the filter-based microplate photometer.
Covers unpacking, checking contents, environmental requirements, and releasing the transport lock.
Details connecting the power supply, computer, and printer to the instrument.
Guides through the initial checks to ensure the instrument functions correctly after setup.
Identifies key parts of the instrument through front, back, and side views.
Describes the display, keypad, and their navigation functionalities for software interaction.
Explains how to interact with the software menus and navigate through different sections.
Details parameters in the Main menu, including Protocol, Plate format, Measurement, Shaking, and Incubation.
Covers parameters in the Processing menu: Preprocessing, Calculations, Interpretation, and Quality Control.
Explains how to view and analyze results in various formats.
Covers configuring system, filter, printer, and startup settings.
Guides on using pre-defined protocols via quick keys or the protocol list.
Step-by-step examples for creating new protocols, setting parameters, and saving.
Details procedures for printing, exporting, and importing protocols and measurement data.
Explains safety symbols, warnings, cautions, and emergency handling procedures.
Procedures for cleaning, filter/lamp management, transport lock, and general upkeep.
Lists error/warning codes and provides guidance for resolving instrument problems.
Lists general and performance specifications for the instrument.
Lists codes for filters, spare parts, accessories, plates, and verification tools.
To Next Page