Steri-Cult Incubator _______________________________________________________________________________
i
Model Size Voltage
3307 Medium 115
3308 Large 230
3310 Medium 115
3311 Large 230
If the incubator is not used in the manner speci-
fied in this operating manual, the protection pro-
vided by the equipment design may be impaired.
Read This Instruction Manual.
Failure to read, understand and follow the instructions in
this manual may result in damage to the unit, injury to operat-
ing personnel, and poor equipment performance.
CAUTION! All internal adjustments and maintenance must
be performed by qualified service personnel.
The material in this manual is for information purposes only. The
contents and the product it describes are subject to change with-
out notice. Thermo Electron Corporation makes no representa-
tions or warranties with respect to this manual. In no event shall
Thermo be held liable for any damages, direct or incidental, aris-
ing out of or related to the use of this manual.
MANUAL NUMBER 7013307
-- -- 4/11/05 Added heat/CO2 information pertaining to door openings in Section 5.7 ccs
3 22767/IN-3242 3/9/05 Corrected RH sensor from 290154 to 290174, electrical schematics ccs
2 -- 10/21/04 Updated sterilization Checkpoints concerning stacked units (per D. Figel) ccs
-- 22434/IN-3211 8/25/04 Updated water quality description for water bottle ccs
1 21730/SI-9181 6/15/04 Schematic updates, alternate source for 250085 solenoid valve ccs
0 22150/IN-3177 2/17/04 Standard manual size ccs
-- 21951/IN-3150 12/19/03 Inner door switch only to P/N 360263 ccs
-- 21980/IN-3156 11/07/03 Added min/max load and analog output boards max external cable length ccs
- 21596/IN-3124 10/24/03 New temperature sensor thermistor 290185 (glass enclosed) ccs
REV ECR/ECN DATE DESCRIPTION By
To Next Page
Loading...