THERMO ELECTRON CORPORATION STERI CULT INCUBATOR WARRANTY USA*
The Warranty Period starts two weeks from the date your equipment is shipped from our facility. This allows shipping time so the
warranty will go into effect at approximately the same time your equipment is delivered. The warranty protection extends to any
subsequent owner during the first year warranty period.
During the first year, component parts proven to be non-conforming in materials or workmanship will be repaired or replaced at
Thermo's expense, including labor. In addition, after the initial warranty period of one year, the CO
2 sensor (IR) will be warranted
for a second year, parts only. The blower motor will be warranted for three years, total, parts only. Installation and calibration are
not covered by this warranty agreement. The Technical Services Department must be contacted for warranty determination and
direction prior to performance of any repairs. Expendable items, glass, filters and gaskets are excluded from this warranty.
Replacement or repair of components parts or equipment under this warranty shall not extend the warranty to either the equipment
or to the component part beyond the original warranty period. The Technical Services Department must give prior approval for
return of any components or equipment. At Thermo's option, all non-conforming parts must be returned to Thermo Electron
Corporation postage paid and replacement parts are shipped FOB destination.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL OR IMPLIED.
NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. Thermo Electron
shall not be liable for any indirect or consequential damages including, without limitation, damages relating to lost profits or loss of
products.
Your local Thermo Sales Office is ready to help with comprehensive site preparation information before your equipment arrives.
Printed instruction manuals carefully detail equipment installation, operation and preventative maintenance.
If equipment service is required, please call your Technical Services Department at l-888-213-1790 (USA and Canada) or 1-740-
373-4763. We're ready to answer your questions on equipment warranty, operation, maintenance, service and special applica-
tions. Outside the USA, contact your local distributor for warranty information.
* Models covered under this warranty: 3307 3308 3310 3311
ISO
9001
REGISTERED
Rev. 1 2/03
To Next Page
Loading...