iCAP 6000 Series ICP-OES Spectrometer Hardware Manual
Page 41 of 51 Version 1.5 – March 2006
Make sure the saved method has a
Calibration routine selected in the
AUTOMATION PARAMETERS
SEQUENCE page.
Note: The sequence Automation
page must be edited and method
saved before running samples with
the autosampler.
The autosampler position tray will be displayed.
Right click on the session name and
select Auto-Locate this will then
highlight the sample and standard
positions.
Note: Make sure the Plasma is
ignited
Click on the Autosampler connect icon as shown.
Click on Run icon
Image of Autosampler showing progress of sample
run.
To Next Page