User
determined programs can he stored into the memory of the instrument
foe
later use.
s
done with the SAVE key. When it is pressed the instrument asks for program number
(P
R),
which can be
1
to
64.
Enter the program number. SAVING DATA
is
blinking on the dis
The stored program can be taken later into use with the
RECALL
key and using the
sane
progra
The following general parameters can
be
selected with the P
key (and the arrow keys or ENTER key):
1.
PRWERFO
T
(header idamation and abserbances
are
sent via the interface)
2.
COMPUTER
FORMAT
(only absarbances are sent via the
.
.
interlace in plate format)
3.
OLD MCC
IiO
AT (only absorbances are sent via the
interlace
in
column format)
PLATE MOVEmNT:
The speed
at
which the plate is moved can he selected:
1.
CONTINUOUS
(5
s)
2.
STEP MODE
(25
s)
Programs in the memory of the instrument are printed on the built-in
printer.
P
R
ONIOFF
Odoff selection of the built-in printer. When the printer
is
snppresse
SELECTION
results are automatically sent via the interface.
When the instrument is switched on, the latest selection will be valid.
PLATE ANALYSIS:
Aner results have been presented in the microplate format,
fhe
instrument sends via the interface the mean value, minimum value,
maximum value, delta value, standard deviation value, delta
percentage and coeficient of variation percentage for every column
and row and also for the whole plate.
4
CLOCKSET:
Odoff selection of the analysis:
I. ANALYSIS OFF
2.
ANALYSIS ON
(nut available on module
2
and
4)
Number of filters and filter wavelengths can be entered.
NROF
FlLTERS 1
Number of filters
(1
-
8)
can
be
entered or
changed with the arrow and number keys.
FILTER
I
WAVEE
340
Filter wavelengths in nanometers can
entered or changed with the arrow an
number keys.
The entered values are used until changed.
Date and lime (year, month, day of the week, hour, minute) can
changed with the arrow and number keys.
On the printout of the external printer an empty row can
between the results
of
the rows (print out spacing).
Odoff selection of the printout spacing:
1.
NOSPACMG
2.
PRINTOUT SPACING
Mixing of the microplate before measurement
is
started
1.
MIXING OFF
2.
MIXYNGON
*
MlXlNG
FAST
*
MXMGEVIEDrn
*
MIrnGSEBW
-
MInNG
TTNDE:
enter the time in seconds
(0-60
s).
Default value
is
Li
s.
10
MODULE LISTING
List of modules is printed out.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
