Need help?Do you have a question about the ThermoFisher Scientific HyPerforma S.U.F. and is the answer not in the manual?
General| Manufacturer | Thermo Fisher Scientific |
|---|---|
| Type | Single-Use Fermentor (S.U.F.) |
| Material (Bioreactor) | Polyethylene-based film |
| Sterilization | Pre-sterilized, single-use |
| Volume Range | 50L to 2000L |
| Material | Polyethylene-based film |
| Temperature Range | Ambient to 40°C |
| Ports | Multiple ports for sensors, sampling, and additions |
| Compliance | cGMP-compliant |
Covers risks from hazardous voltage and static electricity buildup in BPCs.
Highlights burst hazards and requirements for protective earth grounding.
Covers unpacking, hardware setup, and initial preparation steps.
Addresses facility requirements, electrical connections, and site readiness.
Provides step-by-step instructions for the physical installation of the unit.
Detailed instructions for loading the BPC and drive shaft for 30 L systems.
Detailed instructions for loading the BPC and drive shaft for 300 L systems.
Covers operating parameters, agitation, temperature, and cell inoculation.
Covers routine and preventive maintenance schedules and procedures.
Provides solutions for common hardware and operation issues.
To Next Page