46
4. Confirm the desired temperature and save the setting by pressing OK (key SET), and then to
go back by pressing
Mark WORK means “factory settings“ .
Remark:
If the buffer menu option is activated, the boiler water temperature setting is not
visible.
Water temperature in tank (puffer)
The water temperature in the tank can be set in the range of 40 ° C to 85 ° C . Increasing and decreasing
the temperature is done in the same way as changing the temperature in the boiler. After selecting the
desired value to save, confirm by pressing OK (SET key).
The following diagram describes how to set certain temperatures.
To Next Page
Loading...
