Thermopatch HS-4-C - Error Codes and Explanations; 9.2 Replacement Parts

thermopatch.com
13
Error codes:
• Error 1 = Temperature sensor short (0 Ohm)
• Error 2 = Temperature sensor broken
• Error 3 = Error in Eprom: the processor has no access to the memory for saving or
reading of information.
• Error 4 = Motor timed out, not in position or motor switch error:The correct position
of the Cam Arm Motor cannot be detected. Rotate the Cam Arm Motor Shaft checking
actuation of the Motor Detection Switch. Also, check wire connections on the Motor
Detection Switch.
9.2 Replacement parts
• Sealing pad SPA43941
• Teon cover, self-adhesive SPA9000
• Fuse: 2x 20015-26 3.15 A Fuse