thermopatch.com
5
A
B
C
2. Intended use
The machine HS-4-C is practical and universally applicable. It can be used to apply patches,
textile emblems, heat seal transfers, in short all Thermopatch materials suited for marking
and mending to textiles and technical bres.
3. Assembly and installation
3.1 Installing the HS-4-C
Take the machine out of the box and put it on a worktable near an earthed wall socket.
Ensure that there is sucient free space around the HS-4-C. Also ensure that there are no
items near the HS-4-C, which are sensitive to heat radiation.
3.2 Electrical Requirements
The HS-4-C should be connected to the electricity grid (230V) with the supplied electrical
cable (A).
The HS-4-C is earthed and has been provided with two fuses of 3 Amps (B).
To Next Page
Loading...
