thermopatch.com
9
5. Overview of safety measures and warnings
5.1 Safety
At normal usage no problems are to be expected. Regardless that, we state underneath a
few pointers which will limit existing risks to a minimum.
• Unplug the machine from the wall socket whenever you are maintaining or cleaning the
machine.
• Make sure there is enough working space around the machine. Although the heat
radiation of the press is very low, it is still necessary to have enough room for cooling
down.
• Extensions and connections must not get snagged
• Avoid contact with the press arm and the heating element
• Pull the fabric tightly over the sealing pad.
5.2 Warning symbols
On the front side of the press head a warning sticker for hot surface has been applied.
WARNING!
Hot surface
To Next Page
Loading...
