Product
1. LCD Display: Displays the current temperature
measured by the stainless steel temperature probe.
2. ON/OFF Button: Press once to turn ON/OFF the unit.
3. °C/°F Button: Press the °C/°F Button to select
temperature display unit (°C or °F).
4. Temperature Probe: Insert stainless steel
probe into food or meat to measure internal food/meat
temperature.
temperature
5. Battery Compartment: Holds one LR44(AG13) button
battery to power the unit.
°C/°F Button
Temperature Probe
LCD Display
Sleeve
Battery Compartment
ON/OFF Button
Specifications
1. Temperature range: -58°F~572°F(-50°C~300°C). If the
temperature is below -58°F(-50°C) or above 572°F
(300°C), LL.L or HH.H will show on the display.
2. Temperature display units: °C and °F.
3. 10-minute auto-off.
4. Resolution: 0.1 °C/°F.
5. Temperature Accuracy: ±0.9°F (±0.5°C) in range.
between 32 to 212°F (0 to 100°C).
6. Power supply: 1 X LR44 (AG13) 1.5V.
Before first use
1. Insert or Replace Battery: Insert one LR44 or AG13
button battery into the battery compartment with
correct polarity (+) and (-) as indicated.
2. Clean stainless steel probe tip: wash tip with warm
soapy sponge or cloth, then rinse and dry.
3. Do not immerse product body in water.
4. PLEASE READ AND FOLLOW ALL INSTRUCTIONS.
5. The thermometer is now ready for use.
To measure food temperature
1. Press the ON/OFF button to turn on the thermometer.
2. Press the °C/°F button on the back of the unit
the temperature unit: °C or °F. Please note, when
powering on the thermometer for your next use, the
temperature unit will be saved based off your last
selection.
to select
-2-
-3-
ENEN
To Next Page
Loading...
