Need help?Do you have a question about the ThermoPro TP-19 and is the answer not in the manual?
General| Temperature Range | -58°F to 572°F (-50°C to 300°C) |
|---|---|
| Resolution | 0.1°F/°C |
| Display | LCD |
| Cable Length | Not applicable |
| Type | Digital food thermometer |
| Temperature Accuracy | ±0.9°F (±0.5°C) |
| Battery | CR2032 |
| Auto-off | Yes |
Displays the current temperature reading.
Hold °C/°F button for 3 seconds to switch between units.
Press LOCK to hold temperature for 5 seconds.
Insert probe into food to measure internal temperature.
Compartment for 1 x AAA battery.
High precision sensor for temp readout within 3 seconds.
Feature for adjusting the thermometer's accuracy.
IP65 rating indicates water resistance.
Includes sleep and wake modes for power saving.
Magnets for convenient storage.
Operates from -58°F to 572°F (-50°C to 300°C).
Features LOCK/°C/°F/CAL buttons.
Automatically powers off after 90 seconds of inactivity.
0.1 °C/°F for precise measurements.
±0.9°F (±0.5°C) within 14°F to 212°F range.
Powered by 1 x AAA 1.5V battery.
180° auto-rotating display for optimal viewing.
Install battery, clean probe tip, and read instructions.
Turn on, insert probe, wait for stabilization, and read.
Switch between Celsius and Fahrenheit.
Lock readings and wash probe after use.
Steps to re-calibrate the thermometer for accuracy.
Prepare ice/water mixture for calibration reference.
Immerse probe, check reading, enter and confirm calibration mode.
Steps to revert to the default calibration setting.
Tips for accurate readings and proper usage.
Guidance on cleaning and avoiding damage.
Manufacturer's declaration of compliance.
Proper disposal of the thermometer and batteries.
Details of the product warranty coverage.
To Next Page
