ThermoPro TP-19 - LED Display Function; Temperature Unit Switching; Locking Temperature Reading; Temperature Probe Usage

MLAB
www.instrument.co.th
-2-
Thermocouple Probe
LED Display
Built-in Magnet
Battery Compartment
CAL
1 Product
LOCK
1. LED Display: Displays the current
temperature.
2. C/°F: Hold for 3 seconds to switch
between °C and °F.
°
3 LOCK: Press once to lock the current
temperature for 5 seconds, press
again to unlock.
.
4 Temperature Probe: Insert the probe
into food to get the internal meat
temperature.
.
5 Battery Compartment: Use 1 x AAA
battery to power the unit.
.
6 Super-Fast Thermocouple Probe:
High precision sensor, you can get a
temp readout within 3 seconds.
.
7 Calibration Function.
8 Waterproof: IP65.
9 Motion-sensing sleep and wake
modes
.
10 Built-in magnets.
2 Specifications
1. Temperature range: 58°F ~ 572°F
(-50°C ~ 300°C). If the temperature
is below -58°F (-50 °C) or above
572 °F (300 °C), LLL or HHH will
show on the screen
-
2 Three Buttons: LOCK/ C/°F/CAL. °
3 90 seconds Auto-off feature .
4 Resolution: 0.1 °C/°F.
5 Temperature Accuracy: ±0.9°F (±0.5
°C) in range between 14 to 212°F
(-10 to 100°C)
.
6 Battery: 1 x AAA 1.5V included.
7 180° auto-rotating display.
3 BEFORE FIRST USE
1 Insert 1* AAA battery with correct
polarity (+) and (-) as indicated.
.
2 Wash probe tip with warm soapy
sponge or cloth, then rinse and dry.
.
3 Wash under running water without
fear!
.
4 PLEASE READ AND FOLLOW ALL
INSTRUCTIONS.
.
5 The thermometer is now ready to use..
4 TO MEASURE FOOD
TEMPERATURE
1 Pull the probe away from the body of
the thermometer to turn on the
thermometer, and fold in the probe
to turn off the thermometer.
.
°C/°F
-3-
EN EN