22
To retain the performance of the device, it is necessary about twice a
year to carry out dust removal using a vacuum cleaner or a brush at
the air inlets and outlets. Every ve years, have the inside of the device
checked by a professional electrician. The outside of the device can be
cleaned with a damp cloth.
Never use abrasive products or solvents
.
MAINTENANCE
CLEANING THE FAN
Clean the air inlet and outlet grilles with a vacuum cleaner.
The fan is equipped with a dust lter which, when it is full, can cause it
to stop (an error code Err 6 is displayed on the control panel display).
For best use, clean your lter regularly.
Commands
Received
No current
Complete
altermation
230 V
Negative
Half/altermation
– 115V
Positive
Half/altermation
+ 115V
Oscilloscope
Ref/Neutral
Mode
obtained
COMFORT ECO ANTI - FREEZE
STOP HEATING
LOAD SHEDDING
USING THE HOOKS
You have two hooks.
To Next Page
