Thermor Riva 4 - Locking Commands and Modes Description

24
To avoid the commands being changed by children, you may lock your
device's commands by pressing and holding
.
Select "Lock"
and validate with .
Do the same to unlock the commands by selecting "Unlock"
.
LOCKING COMMANDS
2 operating modes are proposed :
Active Prog
- The device follows the internal program dened for each day of the
week. The following ranges are dened when the device is switched
on :
Monday to Friday, comfort from 6am to 9am and from 6pm
to 9pm
Saturday and Sunday, comfort from 8am to 12am and from
6pm to 9pm. .
You may modify these ranges and dene 3 Comfort temperature rang-
es per day.
During these Comfort ranges, the temperature setpoint is adjusted
using or .
Outside the Comfort ranges, lowering the temperature is set in “Low-
er ECO T°” Prog mode
- The device follows your installation’s external programming orders
STOP and Frost (see the manual for your programming unit)..
inActive Prog
-The device follows the setpoint temperature adjusted at all times
-The device follows your installation’s external programming orders
(see the manual for your programming unit).
DESCRIPTION OF THE MODES