ThinkPad 11e 5th Gen - Replacing the Base Cover Assembly

4. Loosen the screws that secure the base cover assembly. Pry up the latches as illustrated. Then remove
the base cover assembly.
5. Install the new base cover assembly in place. Tighten the screws to secure the base cover assembly.
6. Turn the computer over. Connect the ac power adapter and all cables to the computer.
Replacing the M.2 solid-state drive
Before you start, read “Important safety information” on page v and print the following instructions.
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
86
11e 5th Gen and Yoga 11e 5th Gen User Guide