ThinkPad 11e 5th Gen - Replacing the ThinkPad Pen Pro Charger

5. Remove the power button card as shown 1 . Detach the connector from the power button card 2 3 .
6. Attach the connector to the new power button card 1 2 . Align the notches on the power button card
with the notches on the computer. Insert the new power button card as shown
3 .
7. Reinstall the base cover assembly.
8. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the ThinkPad pen pro charger
Before you start, read “Important safety information” on page v and print the following instructions.
Chapter 9. Replacing devices 93