ThinkPad P50 - Page 94

Table 2. Config menu items (continued)
Menu item
Submenu item
Value
Comments
CIRA Timeout
0-255
Note: The default
value is 60
seconds.
Set the timeout option for CIRA
connection to be established. Selectable
second values are from 1 to 254.
If you select 0, use 60 seconds as the
default timeout value.
If you select 255, the waiting time for
establishing a connection is unlimited.
Console Type
• PC ANSI
• VT100+
• PC-ANSI
• VT-UTF8
Select the console type for AMT.
Note: This console type should match
the Intel AMT remote console.
Date and Time menu
To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu.
Then do the following:
1. Use the cursor keys to select System Date or System Time.
2. Type a date or time.
Security menu
To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu.
The following table lists the Security menu items. Default values are in boldface. The menu items might
change without notice. Depending on the model, the default value might vary.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 3. Security menu items
Menu item Submenu item Value Comments
Password Supervisor
Password
• Disabled
• Enabled
See “Using passwords” on page 57.
Lock UEFI BIOS
Settings
• Disabled
• Enabled
Enable or disable the function that protects
items in ThinkPad Setup from being changed by
a user who does not have the supervisor
password. By default, this is set to Disabled. If
you set the supervisor password and enable this
function, no one but you can change any items
in ThinkPad Setup.
76 P50 User Guide