Thinkware Q800 PRO - Page 10

10
Connecting and arranging the power cable
When the engine and electrical accessories are turned off, connect the
car charger.
1
2
1. Connect the car charger to the
product’s DC-IN power port and
insert the cigar jack into the vehicle’s
power socket.
2.Arrangeandxthepowercable
using the adhesive cable holders.
Refertothegureontheleftfor
the recommended locations for the
adhesive cable holders.
• The hardwiring cable (optional) must be professionally installed to the
vehicle by a trained mechanic.
• Use the authentic THINKWARE car charger. Use of third party power
cablesmaydamagetheproductandresultinelectricalreor
electrocution due to the voltage difference.
• Do not cut or modify the power cable yourself. Doing so may damage the
product or the vehicle.
• For safe driving, arrange the cables to prevent the driver's vision from
being obstructed or interfering with driving. For more information about
arranging cables, visit www.thinkware.com.
Q800PRO_QSG_ACMA-025FAM103.indb 10Q800PRO_QSG_ACMA-025FAM103.indb 10 2021-08-09 오후 1:20:182021-08-09 오후 1:20:18