Third Reality 3RSP019BZ - BLE Mode Operations; Using under BLE (Bluetooth) mode; Product Configuration

Note: Pairing mode will last for 3 minutes. If you haven’t pair it with other devices during this time, it will
automatically exist the pairing. If you want the plug back to pairing mode, just simply unplug it from the
outlet and then plug it in or factory reset it by pressing and holding the button for more than 10 seconds until
the LED light flashes.
Pairing: LED light alternately flashes in green and red.
Pairing Completed: LED light is out.
Power ON: LED light is ON in green.
Power OFF: LED light is OFF.
Note: The factory default mode of Third Reality Smart Plug is BLE (Bluetooth Low Energy). You can directly
pair Third Reality Smart Plug with the compatible Echo Devices (except Echo Gen1).
LED Light
LED Status
Product configuration
Using under BLE (Bluetooth) mode
LED Light
4