All Amazon Echo Series (except Echo Gen1)
All Amazon Echo Dot Series (except Echo Dot Gen1)
All Amazon Echo Show Series
Echo Spot
Echo Input
Echo Flex
Echo Studio
Setting up your Smart Plug
Compatible Devices List
5
After your Smart Plug is powered on, press and hold the ON/OFF button for more than 10 seconds until the
LED light flashes indicating that your Smart Plug is in pairing mode. (The mode won’t be changed while factory
reset your Smart Plug.)
Note: Please ensure your Echo Devices are setup before adding the Smart Plugs. They need to have the latest
software upgrade. You can try “ Alexa, is my software up to date?” to trigger software update, then add the
Smart Plugs.
Factory Reset
To Next Page
Loading...
Need help?
General