Check the Smart Plug’s mode
2.
Insert the plug into an outlet and turn it on.
Check the status of the LED light. Green means in BLE mode; Red means in ZigBee mode.
7
Factory reset the Smart Plug
Power on the Smart Plug, and then press and hold the button for more than 10 seconds until the LED light
flashes in green and red.
1.
Trouble Shooting
Using your Smart Plug
Control the Smart Plug via voice command, says “ Alexa, turn on/off First Plug ”.
Schedules or timers to turn the Smart Plug ON/OFF automatically.
Create routines to enjoy your smart life, say “ Alexa, good morning ” to turn on the coffee maker, etc.
Remote control the Smart Plug from your phone even if you are not at home.
Use the Plugs as extenders, they can help Echo Devices to connect with the plugs that are further away
from your Echo.
1.
2.
3.
4.
5.
To Next Page
Loading...
Need help?
General