Third Reality Smart Bridge MZ1 - Setup with Google Home

Compatibility
Google Home App version:
Android: 3.3.1.4 or later
IOS: 3.3.104 or later
Make sure your Google Home speaker is connected to the same Wi-Fi
network, launch your Google Home App. Tap + and then tap New
device. Choose a home and tab Next, choose the Matter bridge then
tab Next, Continue without scanning, paste the Setup Code to Con-
tinue, create a name for the bridge, the bridge will be added.
2.
Setup with Google Home
12
Note: It is highly recommended to download and install 3R-Installer
app on your phone first, follow the instructions below to setup the
bridge in the 3R-Installer app, then get the setup code and add the
bridge to your Google Home through multi-admin. You can also Scan
the QR code to add the bridge to your Google Home directly.
1. Setup the Bridge with 3R-Installer App, copy the setup code of the
Matter bridge in 3R-Installer App.(Code effective duration: 3 min, see
Setup with 3R-Installer App)