Third Reality Smart Bridge MZ1 - Setup with Apple Home

Compatibility:
iOS system: Version 16.6 or later.
Matter-supported Controller: Home Pod, Home Pod mini, or Apple TV.
Note: It is highly recommended to download and install 3R-Installer
app on your phone first, follow the instructions below to setup the
bridge in the 3R-Installer app, then get the setup code and add the
bridge to your Apple Home through multi-admin. You can also Scan
the QR code to add the bridge to your Apple Home directly.
Make sure your Apple Home Controller is connected to the same
Wi-Fi network, launch your Home App. Tap + and then tap Add or
Scan Accessory to add a new device. Tab More Options, Select the
Smart Bridge MZ1 to Add device, paste the Setup Code copied from
3R-Installer App to Continue, set the location and name for the
bridge, the bridge will be added to My Home.
2.
1. Setup the Bridge with 3R-Installer App, copy the setup code of the
Matter bridge in 3R-Installer App.(Code effective duration: 3 min, see
Setup with 3R-Installer App)
Setup with Apple Home
07