Third Reality Smart Bridge MZ1 - Factory Reset; Setup with 3 R-Installer

Long press the reset button with a pin through the pinhole until 3 LED
turn fast blinking.
Download and install the 3R-Installer App(iOS/Android) on your
phone.
1.
Turn on Bluetooth on your phone, and make sure your phone has a
stable internet access through IEEE 802.11 b/g/n 2.4GHz Wi-Fi net-
work.
2.
Power on the Matter Bridge with the power cable and adaptor, the
Wi-Fi LED indicator turns fast blinking, indicating it is ready for Wi-Fi
setup.
3.
Open the 3R-Installer App on your phone and tap + in the upper right
corner.
4.
Factory Reset
Setup with 3R-Installer
03