Third Reality Smart Bridge MZ1 - LED Status

02
Zigbee Wi-Fi Power Input Reset PinholePower
LED Status
Device Status
Zigbee idle
Zigbee ready for pairing
Wi-Fi Idle/Ready for setup/Wi-Fi Matter reset
Wi-Fi connection 15 min timeout
Wi-Fi connected
Wi-Fi connection lost/resuming
Power on
Device OTA in progress
Device/Module self test fault
Factory reset
LED Status
Zigbee LED On
Zigbee LED slow blinking
Wi-Fi LED fast blinking
Wi-Fi LED Off
Wi-Fi LED On
Wi-Fi LED slow blinking
Power LED On
Power LED slow blinking
Power LED fast blinking
All 3 LED fast blinking