thomann Harley Benton DNAfx GiT Core - Page 25

1. Turn [MODE] to select the desired eect block.
2. Turn [VALUE] to select the desired value (display shows ‘GAIN’ ‘MID’ ‘PRES’ ‘BASS’
‘TREBLE’ ‘MST’ ).
3. Press [VALUE].
ð
The set value is applied.
4. Turn [VALUE] to change the parameters.
5. Press [VALUE] to exit the edit menu.
You can adjust the volume in several ways:
n Using the [MASTER] rotary control
n Using the ‘INPUT LEVEL’
submenu in the system settings
n Using the external expression pedal
n Using the ‘MST’
submenu in the eects
Editing eects
Adjusting the volume
Operation
DNAfx GiT Core
25
Multi Eects Unit