thomann Harley Benton DNAfx GiT Core - System Settings

6.8 System settings
1. Press [SYSTEM] to call up the system settings.
2. Turn [VALUE] to select the desired submenu.
3. Press [VALUE].
ð
The setting is conrmed.
Submenu Description
‘INPUT LEVEL’ Sets the input level of the device, -∞~+6 dB.
‘SCREEN’ Adjusts the brightness of the display.
‘CAB SIM TRHU’ Sets the dierent output options in the speaker simulation of the
device.
‘OTG OUT’ Sets the output level for OTG mode.
‘RESET’ Resets the device to factory defaults.
Operation
36
DNAfx GiT Core
Multi Eects Unit