thomann Harley Benton DNAfx GiT Core - Software; Software Update

6.9 Software
With the dedicated editing software, the device can be computer-controlled (PC or MAC) for
sound recording, for software updates or for editing presets.
To do this, connect your computer to the device via the USB port on the device.
Make sure that the device is connected to the power supply via the supplied power
adapter.
6.9.1 Software update
The current software version can be downloaded for free from www.harleybenton.com or our
website www.thomann.de.
1. Install the current software version on your computer.
2.
Simultaneously hold down the [TUNER] and [LOOPER] foot switches and turn on the
device.
3. Connect your computer to the device via the USB port on the device.
4. Start the software on your computer and then start the software update.
Operation
DNAfx GiT Core
37
Multi Eects Unit