1. In pattern selecting mode, press the [ PATTERN] button to enter MIDI output format choice mode.
ð
The LED display then shows the current MIDI output format ‘P-N’ (default setting, internal format) or ‘--N’ (GM format).
2. Press the [+/–] buttons to select the other one.
If the internal format (P-N) is selected, program change and note information (note ON/OFF) commands will be transmitted.
When the GM format (--N) is selected, only ‘note on/off‘ commands will be transmitted.
The above setting only affects the primary percussion channel (MIDI channel 10).
MIDI-out format
HD-100
15
To Next Page
Loading...
