The ‘Master Tune’ parameter allows you to adjust the trigger pitch of a drum kit globally.
1. Press the [SETUP] button and use the rotary control [–] / [+] to select the parameter
‘Master Tune’.
2. Use the rotary control [–] / [+] to select the desired value in a range from –50 to +50.
Default value is 0, this corresponds to the concert pitch A (440 Hz).
3. Press [ENTER] to confirm.
ð
The next parameter appears in the display.
4. Adjust the next parameter or quit the setup menu by pressing [EXIT].
The drum module allows you to adjust the touch sensitivity of every pad.
1. Press the [KIT] button to change to the kit mode, followed by the [SETUP] button.
2. Repeatedly press the [ENTER] button or turn the rotary control [–] / [+] until the menu
item ‘Advanced’ appears in the display.
3. Press [SETUP] for confirmation to open the setup menu.
ð
‘Sensitivity’ is indicated as the first value.
Pitch
Touch sensitivity
Operation
e-drum modul
40
To Next Page
Loading...
