1. Press the [CLICK] button twice to enter the Click menu.
ð
The bar indicator (‘Time-Sig’) flashes in the second line of the display.
2. Use the rotary control [–] / [+] to select the desired time signature (1–8/2, 1–8/4, 1–8/8,
1–8/16, default value is 4/4).
3. Confirm the selection with [ENTER].
ð
In the first line of the display then flashes the indicator of the current click volume.
1. When the display of the current click volume is flashing (‘Metro Vol’), you can use the
rotary control [–] / [+] to adjust the desired volume in a range from 0 to 127 (default
value is 96).
2. Confirm the selection with [ENTER].
ð
In the first line of the display then flashes the indicator of the current click sound
Time signature
Volume
Operation
e-drum modul
46
To Next Page
Loading...
