1. When the display of the current click sound is flashing (‘Metro Sound’), you can use the
rotary control [–] / [+] to set the desired sound: ‘Prc’ = Percussion, ‘Eng’ = English or
‘Chn’ = Chinese (default value is ‘Prc’).
2. Confirm the selection with [ENTER].
ð
The selection is applied and you leave the Click menu.
Press [EXIT] to quit the menu at any time.
If you don't want to change one of the three settings you may just press [ENTER] to
jump to the next parameter.
The click continues running during the setup.
The click tempo can be adjusted independently from the three other parameters:
Sound
Tempo
Operation
MPS-500
47
To Next Page
Loading...
