Thomas LP-30A - During Operation; Service Intervals

7
During Operation
• Ensure that the operating air temperature is within the range -10°C to +40°C.
• Ensure that the air humidity does not rise above 90%.
Service Intervals
Changing of the pump chamber block should only be undertaken by trained
service personnel.
LP-30A LP-40A LP-60HN LP-60EN LP-80E
Chamber block change:
(Diaphragm & chamber block
are one set)
max. 26.000 running hours or
latest after 48 months
max. 18.000 running hours or
latest after 36 months
Filter change Every 3 months
Recommended working
pressure (mbar ± 20%)
120 120 150 150 150
LP-80HN LP-100H LP-120H LP-150HN LP-200HN
Chamber block change:
(Diaphragm & chamber block
are one set)
max. 18.000 running hours or
latest after 36 months
max. 13.000 running hours or
latest after 24 months
Filter change Every 3 months
Recommended working
pressure (mbar ± 20%)
160 180 200 200 200
LW-200 LW-240 LW-300 LW-350 LW-400
Chamber block change:
(Diaphragm & chamber block
are one set)
max. 18.000 running hours or
latest after 36 months
Filter change Every 3 months
Recommended working
pressure (mbar ± 20%)
200 200 200 200 200
Important: Above-named pump chamber block change intervals are only for operation with the recommended
working pressure ± 20%.