THOMSON 300 - Using the Speedtouch

4 SpeedTouch™ for Mac OS
3EC 36714 BAAA TCZZA Ed. 02
31
4.2. Using the SpeedTouch™
Introduction This section will show you how to use the SpeedTouch™ to make a connection to the
Internet and how you can check the SpeedTouch™ status.
Installation The use of the SpeedTouch™ depends on the Mac OS you are running:
In case of:
• Mac OS 8.6 or Mac OS9.x
Proceed with subsection “4.2.1. Using the SpeedTouch™ in Mac OS8.6 and Mac
OS9.x” on page 32
• Mac OS X (Mac OS10.1)
Proceed with subsection “4.2.2. Using the SpeedTouch™ in Mac OS X (Mac
OS10.x)” on page 35.