Connections and Setup
7
EN
Functions in VCR mode
PR+ / PR- Change channel.
CLEAR Set the counter to zero.
Access the VCR main menu. Exit a menu.
TIMER (green) Display the
SHOWVIEW
menu (see page 12).
0-9 Select a channel, enter numbers.
AV Select the devices connected to the Audio/Video sockets (AV1,AV2, ...).
PLAY MODE Watch one TV channel whilst recording another one.
REV Start fast reverse, reverse accelerated play (see page 10).
FWD Start fast forward, forward accelerated play (see page 10).
STOP Stop play, accelerated search, slow motion or recording.
PAUSE Freeze frame, frame advance (see page 10).
RECORD Start recording (see page 11).
SP/LP Double the recording time of a tape with the LP function (see page 11).
OPEN
.
CLOSE Eject the tape.
Functions in TV mode
This remote control can be used with some recent models of televisions:Thomson, Saba, Brandt,
Ferguson,Telefunken and Nordmende.
Note:The buttons described below operate as specified, provided that the relevant function is available on
the television.
TV Select the television.
Adjust the sound volume.
(mute) Mute and restore the sound.
PR+ / PR- Change channel.
GO BACK Return to the channel watched before last.
CLEAR Exit a menu.
MENU Access the television's main menu.
Use the Zoom function (with a 16/9 television only).
INFO (yellow)
Obtain information about the channel.
GUIDE (blue) Display the programme guide.
Note:The coloured buttons can also be used to access the Teletext topics indicated in colour (if your
television has the Teletext function available).
0-9 Select a channel. For 2-digit channels, first press
0
.
To Next Page
Loading...
