8
Operating the Radio
Built-In AFC
The Built-In Automatic Frequency
Control (AFC) works only on FM. It
helps to reduce drift on FM reception
and to keep the radio locked in on the
FM station to which it is tuned.
Antennas
MW Antenna - A built-in ferrite rod
antenna eliminates the need for an
outside antenna for MW reception.
Rotating the unit slightly may improve
reception of distant MW stations.
FM Aerial Antenna - Uncoil the FM
aerial antenna and make sure it is fully
extended. Changing the position of the
antenna may improve reception. You
may even want to tape it to the wall
behind the unit if possible. The higher
the better.
Turning on/off the Radio
Press RADIO ON/BAND to turn on the
radio.
Press OFF to turn off the radio.
Selecting Bands
Press RADIO ON/BAND repeatedly to
select between FM and MW band.
Tuning to Stations
Press REV to search down radio
frequency.
Press FWD to search up radio
frequency.
Press and hold REV or FWD to
automatically search for the next
station in the respective direction.
EN
C_RR520CD EN 5/20/04, 1:06 PM11
To Next Page
Loading...
